해양사업
AUTOPILOT
NAVIPILOT4500N Marine Autopilot은 선박을 안전하고 효율적으로 조종하기 위하여 진보된 선박 조타 네트워크 기술을 사용합니다.
혁신적인 NAVIPILOT4500N은 선박의 부하특성과 기상조건에 대하여 자동으로 맞추어 자체적으로 세부조정이 가능합니다.
Rudder Angle Feedback Unit
-
Steering control unit
-
NAVIPILOT4500N
-
Master Unit
| ENVIRONMENT | |
|---|---|
| Ambient temperature range (operation) | -15° C to +55° C |
| Ambient temperature range (storage) | -25° C to +70° C |
| Protection grade (installed) | IP32 to DIN 40050 |
| Standard magnetic compass | 0.40m |
| Environmental testing in accordance with EN 60945 (IEC 945 +A1) | |
| DIMENSIONS | |
|---|---|
| Front panel Dimensions | 288 x 144 mm to DIN Standard |
| Installation Depth | 150 MM |
| Weight | 1.5 kg |
| Front Panel | Sealed Foil Keyboard, illuminated |
| Display | Graphic Liquid Crystal, illuminated |
| STEERING CONTROL UNIT | |
|---|---|
| Protection grade | IP32 to DIN 40050 |
| Magnetic clearance | I0.4 m |
| Dimensions | 151 mm Height, 392 mm Width, 425 mm Depth |
| Weight | 3 kg |
| Power requirements | 24 VDC (18 V to 36 V) |
| Maximum ripple content | 4 V pp, extreme values should not exceed 36 V or fall below 18 V |
| Power consumption | 10 W max |
| Reverse polarity protection | Built-in |
| Cable connection | Clamp-type terminals |
| POWER REQUIREMENTS | |
|---|---|
| Max ripple content | 4 V pp, extreme values should not exceed 36 V or fall below 18 V |
| Power consumption | 10 W max |
| Reverse polarity protection | Built-in |
| INPUTS | |
|---|---|
| Rudder angle feedback signal | ±10 V ±120° max rudder angle potentionmeter resistance 2kW |
| Power consumption | 10 W max |
| Flux gate for magnetic compass | sine/cosine, C. Plath product |
| NAV/TRACK interface | NMEA 0183 (sentence selectable) from GPS, INS and others |
| Speed input | 200 p/nm or NMEA 0183 |
| 180° turn command | Port and starboard |
| Gyro/magnetic selection | |
| Override status | |
| Mute | |
| Gyrocompass or electronic flux gate | Two NMEA 0183 |
| Central alarm | NMEA 0183 |
| Status signals | AUTO, NFU, Helm, Remote, Ext System |
OUTPUTS
| DC Solenoid Valves | |
|---|---|
| Outputs | Two for port, two for starboard (solid-state relays) |
| Type | Plus or minus switching |
| Voltage | 12 VDC to 110 VDC |
| Rating | 2.0 A max. |
| Additional outputs | Optional |
| Inputs | "Pump on" sense contact closure inputs |
| AC Solenoid valves | |
|---|---|
| Outputs | Two for port, two for starboard (solid-state relays) |
| Voltage | 24 VAC to 230 VAC |
| Rating | 1.0 A max. |
| Additional outputs | Optional |
| Inputs | "Pump on" sense contact closure inputs |
| POWER REQUIREMENTS | |
|---|---|
| Max Ripple Content | 4 V pp, extreme values should not exceed 36 V or fall below 18 V |
| Power Consumption | 10 W max |
| Reverse Polarity Protection | Built-in |
| PROPORTIONAL RUDDER ORDER/ ERROR | |
|---|---|
| Outputs | 80 mV/° to 350 mV/° (isolated) or 4 mA to 20 mA (isolated) |
| Additional outputs | Optional |
| OUTPUTS AND INTERFACES | |
|---|---|
| Heading | NMEA 0183 |
| Heading gyro | HEHDT at 10 Hz |
| Navigation system data | NSD at 1 Hz |
| Heading magnetic | HCHDT or HCHDM or HCHDG at 10 Hz |
| STATUS AND ALARM |
|---|
| System alarm |
| Off course alarm* |
| Override alarm* |
| Gyro/mag status* |
| Ext system status* |
| Deadman's control* |
| Mute* |
* max 4 outputs selectable
| POWER FAILURE ALARM | |
|---|---|
| Primary supply | Potential-free contacts |
| Backup supply | 2 A maximum current, 250 V maximum voltage |